ALMAL SANDWICH PANEL 2 Hours Fire Resistant LDR

Insulated sandwich panels with aluminum facings
U coefficient of walls and roof : 0.308 w/m²K

Composition

Al: Cladding in raw aluminum or anodized or pre-lacquered, thickness of 10/10
M : Core, in rock wool thickness 120 mm with integration of the wooden frame
Al: Cladding in raw aluminum or anodized or pre-lacquered, thickness of 10/10

Possible integrations

• Steel, aluminum, wood, expanded PVC structures, etc
• Passage of steel, aluminum, PVC, IRO tubes
• Reinforcements located in sheet steel, aluminum or plywood strip

Advantages of the integration of the framework

It constitutes a solid wood or solid butted wood structure.
It is directly integrated into the panel to make it monollithic and structural.
This technique allows you to benefit from:
• excellent air and water tightness
• wood protected from bad weather and insects
• very good resistance and stability to fire
• excellent air and water tightness
• a significant reduction in thermal bridges to avoid dew points
• reinforced insulation with thin walls
• integration facilitated by a smooth interior
• quick fixing directly into the interior facing
• A crane under load possible by its solidity forming a monocoque unit
• crane operation facilitated by controlling the dead weight of the assembly made up

Rankings

• PV EFECTIS reaction to fire B-s1, d0
• PV EFECTIS fire resistance 1 hour front and back
• TECHNICAL ADVICE of EFECTIS laboratory fire resistance 1 hour for assembly, floor to validate a tenic shelter or shelter in its entirety